Philips DVDR1000/001, Service Manual

Page: 177 / 317

Circuit-, IC Descriptions and List of Abbreviations
GB 177 DVDR1000 /0x1 /691 9.
9.8 IC’s Analogue Board
9.8.1 IC7001: UDA1328T
Multi-channel filter DAC UDA1328T
1 FEATURES
1.1 General
•
2.7 to 3.6 V power supply
•
5 V tolerant TTL compatible inputs
•
Selectable control via L3 microcontroller interface or via
static pin control
•
Multi-channel integrated digital filter plus non-inverting
Digital-to-Analog Converter (DAC)
•
Supports sample frequencies between 5 and 100 kHz
•
Digital silence detection (output)
•
Slave mode only applications
•
No analog post filtering required for DAC
•
Easy application.
1.2 Multiple format input interface
•
I
2
S-bus, MSB-justified and LSB-justified format
compatible (in L3 mode)
•
I
2
S-bus and LSB-justified format compatible
•
1f
s
input format data rate.
1.3 Multi-channel DAC
•
6-channel DAC with power on/off control
•
Digital logarithmic volume control via L3; volume can be
set for each of the channels individually
•
Digital de-emphasis for 32, 44.1, 48 and 96 kHz f
s
via
L3 and, for 32, 44.1 and 48 kHz in static mode
•
Soft or quick mute via L3
•
Output signal polarity control via L3 microcontroller
interface.
1.4 Advanced audio conÞguration
•
6-channel line output (under L3 volume control)
•
A stereo differential output (channel 1 and channel 2) for
improved performance
•
High linearity, wide dynamic range, low distortion.
2 APPLICATIONS
This multi-channel DAC is eminently suitable for DVD-like
applications in which 5.1 channel encoded signals are
used.
3 GENERAL DESCRIPTION
The UDA1328 is a single-chip 6-channel DAC employing
bitstream conversion techniques, which can be used either
in L3 microcontroller mode or in static pin mode.
The UDA1328 supports the I
2
S-bus data format with word
lengths of up to 24 bits, the MSB-justified data format with
word lengths of up to 24 bits and the LSB-justified serial
data format with word lengths of 16, 18, 20 and 24 bits.
All digital sound processing features can be controlled with
the L3 interface e.g. volume control, selecting digital
silence type, output polarity control and mute. Also system
features such as power control, digital silence detection
mode and output polarity control.
Under static pin control, via static pins, the system clock
can be set to either 256f
s
or 384f
s
support, digital
de-emphasis can be set, there is digital mute and the
digital input formats can also be set.
4 ORDERING INFORMATION
TYPE
NUMBER
PACKAGE
NAME DESCRIPTION VERSION
UDA1328T SO32 plastic small outline package; 32 leads; body width 7.5 mm SOT287-1