86 Glossary
AUDIO IN/OUT Jacks: jacks on the front and back of the DVD/VCR that receive audio from another
source (IN) or send audio to another system (OUT).
Automatic Channel Setup: process in which the DVD/VCR memorizes all available TV channels.Then,
when you press the CHANNEL
o
/
p
buttons, you only scan through channels you receive.
Bands: settings that allow you to tune channels.
• Antenna – VHF (very high frequency; channels 2-13) and UHF (ultra high frequency; channels 14-69).
• Cable – all standard channels can be received without a Cable Box.
Cable Box/DBS Output Channel: 03 or 04.
CD: Compact Disc (audio)
COAXIAL DIGITAL AUDIO OUT jack: Sends digital audio to an audio receiver, allowing you to
adjust the volume at the receiver.This connection provides the 5.1 channel surround sound as heard in
movie theaters.
COMPONENT VIDEO OUT Jacks: jacks on the back of the DVD/VCR that send high-quality video to
a TV with Component Video In jacks.This connection provides the best picture quality. If you use this video
connection, you will not need the supplied yellow video cable.
Dolby Digital: A surround sound system that provides 5.1 channel sound as used in movie theaters.
DTS: Digital Theater Systems.This is a surround sound system, but it is different from Dolby Digital.The
formats were developed by different companies.
Dubbing: copying a video cassette tape using another VCR.
DVD: Digital Video Disc.
Frame: a still picture.
HQ: high quality; a feature in the VCR circuitry which provides enhanced picture detail.
Line Input: The channel to which you set your DVD/VCR during video cassette tape dubbing. If you use the
AUDIO and VIDEO In jacks on the front of the DVD/VCR, select channel 002 (AV FRONT). If you use the
AUDIO and VIDEO IN jacks on the back of the DVD/VCR, select 001 (AV REAR). If you accidentally enter
Line Input mode, press the CHANNEL
o
/
p
buttons or use the Number buttons to select another chan-
nel.
OPTICAL DIGITAL AUDIO OUT Jack: Converts electrical signals into optical signals before sending
the audio to the audio receiver. Optical audio is not prone to external electrical influences and has less
noise, which reduces adverse effects on external equipment. Keep the protective cap on the jack when the
jack is not in use.This keeps dust out of the jack.
OTR: One-Touch Recording; a timed recording on the VCR that starts immediately and records for 30
minutes to eight hours.
Remote Control: the device that came with your DVD/VCR; allows you to operate your DVD/VCR
from a distance.
RF coaxial cable: A black cable supplied with your DVD/VCR. Use it to connect your DVD/VCR to your
TV (or Cable Box or DBS).The supplied cable is a snap-on type. However, you may use a screw-on type if
you prefer.
Special Effects: forward and reverse searching; a still picture; slow motion playback.
S-Video: Produces a clearer picture by sending separate signals for the luminance and the color. If you
connect an optional S-Video cable, you will not need to use the supplied yellow video cable.
Tape Speeds: how fast the video cassette tape travels during a recording or playback.The faster the tape
speed, the better the picture quality will be. Slower tape speeds affect picture quality, but you can fit more
recording time onto a tape.
• SP (standard play) – fastest tape speed (recording time for a T120 tape is approximately two hours); best
picture quality.
• LP (long play) – average tape speed; playback only.
• SLP (super long play) – slowest tape speed (recording time for a T120 tape is approximately six hours).
VCR: video cassette recorder.
VIDEO IN/OUT Jacks: jacks on the front and back of the DVD/VCR that receive video from another
source (IN) or send video to another system (OUT).
DV910(H9100).QX33 01.8.9 10:28 AM Page 86
