Philips 22PFK4000, User Manual

Page: 42 / 59

Audio Out levelling
With Audio Out leveling you can level the sound
volume of the Home Theatre System with the volume
of the TV when you switch over from one to another.
Audio Out delay
If you set an Audio sync delay on your Home Theatre
System, to synchronise the sound with the picture,
you must switch off
Audio Out delay on the TV.
Audio Out offset
If you cannot set a delay on the Home Theatre
System, you can set a delay on the TV with
Audio Out
offset .
Speakers
Home Theatre System
You can send the TV sound to a connected audio
device - a Home Theatre System or audio system.
You can select where you want to hear the TV sound
and how you want to control it.
- If you select
Off , you permanently switch off the TV
speakers.
- If you select
TV speakers , the TV speakers are
always on.
With an audio device connected with HDMI CEC, you
can use one of the EasyLink settings.
- If you select
EasyLink , the TV sends the TV sound
to the audio device. The TV will switch off the TV
speakers when the device is playing the sound.
- If you select
EasyLink autostart , the TV will switch
on the audio device, send the TV sound to the device
and switch off the TV speakers.
With EasyLink or EasyLink autostart selected, you can
still switch to TV speakers if necessary.
To set the TV speakers . . .
1. Press

and select Setup and press OK .
2. Select TV settings > Sound > Sound output .
3. Press

(right) and select Off , TV speakers ,
EasyLink or EasyLink autostart .
4. Press

, repeatedly if necessary, to close the
menu.
To switch to speakers directly . . .
1. While watching TV, press

.
2. Select Speakers and select TV or Amplifier (audio
system).
3. Press

, repeatedly if necessary, to close the
menu.
TV placement
As part of the first installation, this setting is set to
either
On a TV stand or Wall mounted .If you have
changed the placement of the TV since then, adjust
this setting accordingly for best sound reproduction.
1. Press

and select Setup and press OK .
2. Select TV settings > General settings > TV
placement and press OK .
3. Select On a TV stand or Wall mounted and press
OK .
4. Press

, repeatedly if necessary, to close the
menu.
14.5
Ambilight (For 6300 TV
models)
Ambilight style
Ambilight can have a dynamic mode or a static mode.
With
Dynamic mode, the TV follows the colours of the
image on screen.
With
Static , Ambilight has a constant static colour.
You can create an Ambilight static colour yourself.
To select an Ambilight mode . . .
1. Press

and select Setup and press OK .
2. Select TV settings > Ambilight > Ambilight mode .
3. Select Dynamic or Static .
4. Press

, repeatedly if necessary, to close the
menu.
To select a static colour . . .
1. Press

and select Setup and press OK .
2. Select TV settings > Ambilight > Ambilight
mode > Static and press OK .
3. Select the colour from the colour palette.
Press
OK to confirm.
4. Press

, repeatedly if necessary, to close the
menu.
Ambilight brightness
With Ambilight Brightness , you can set the level of
brightness of the Ambilight.
To adjust the level . . .
1. Press

and select Setup and press OK .
2. Select TV settings > Ambilight > Brightness .
3. Press OK and adjust the value with

(up) or

(down).
4. Press

, repeatedly if necessary, to close the
menu.
42