Philips 22PFK4000, User Manual

Page: 21 / 59

In certain countries, the Automatic channel update is
done while watching TV or any moment when the TV
is in standby.
New channels
New channels added with the automatic channel
update are easy to find in the channel list
New . The
same new channels are also stored in the All or
Radio channel list.
New channels are kept in the channel list New as
long as you don't mark them as a favourite or tune to
them.
Reinstall channels
You can search for and reinstall channels and leave
all other TV settings untouched. Alternatively, you can
do a full new TV installation.
If a child lock code is set, you will need to enter this
code before you can reinstall channels.
Reinstall channels
To reinstall the channels only . . .
1. Press

and select Setup and press OK .
2. Select Search for channels > Re-install
Channels and press OK .
3. Select the country where you install the TV.
4. Select
Antenna (DVB-T) or Cable (DVB-C) . The
channel search may take a few minutes. Follow the
instructions on screen.
Full installation
To redo a full TV installation . . .
1. Press

and select Setup and press OK .
2. Select TV settings > General settings > Reinstall
TV and press OK . The installation may take a few
minutes. Follow the instructions on screen.
Factory settings
Factory settings sets the TV back to the original TV
settings for picture and sound. To switch back to the
original Factory settings . . .
1. Press

and select Setup and press OK .
2. Select TV settings > General settings > Factory
settings and press OK .
3. Press OK to confirm.
4. Press

, repeatedly if necessary, to close the
menu.
Channel list copy
Introduction
Channel list copy is intended for dealers and expert
users. In some countries, Channel list copy is only
availble for copying satellite channels.
With Channel list copy , you can copy the channels
installed on one TV onto another Philips TV of the
same range. With Channel list copy, you avoid the
time-consuming channel search by uploading a
predefined channel list on a TV. Use a USB flash drive
of minimum 1 GB.
Conditions
- Both TVs are from the same year range.
- Both TVs have the same hardware type. Check the
hardware type on the TV type plate on the back of
the TV. Typically noted as Q . . . LA
- Both TVs have compatible software versions.
Current version
You can check the current version of the TV software
with
Current software info in

> Setup > Software settings .
Copy channel list
To copy a channel list . . .
1. Switch on the TV which has its channels installed.
Plug in a USB memory device.
2. Press

and select Setup and press OK .
3. Select TV settings > General settings > Copy
channel list > Copy to USB and press OK . To copy
the channel list from this TV, you might be asked to
enter the Child lock code you entered during the
installation.
4. When copying is done, unplug the USB memory
device.
Now you can upload the copied channel list onto
another Philips TV.
Upload channel list
Upload a copied channel list
Depending on whether your TV is already installed or
not, you must use a different way to upload a channel
list.
To a TV that is not yet installed
1. Plug in the power plug to start the installation and
select language and country. You can skip Search for
channels. Finish the installation.
2. Plug in the USB memory device that holds the
channel list of the other TV.
21