Philips 22PFK4000, User Manual

Page: 32 / 59

9
Sources
9.1
Sources list
In the list of connections - the
Source menu - you can find
the devices connected to the
TV.From this Source menu,
you can switch to a device.
Sources menu
To open the Sources menu, press

SOURCES .
To switch to a connected device, select the device
with the arrows

(left) or

(right) and press OK .
To close the Source menu without switching to a
device, press

SOURCES again.
9.2
From standby
With the TV in standby, you can switch on a
connected device with your TV remote control.
Play
To switch on both disc player and TV from standby
and start playing the disc or programme immediately,
press

(play) on the TV remote control.
The device should be connected with an HDMI cable
and both TV and device must have HDMI CEC
switched on.
Home Theatre System
You can switch on your Home Theatre System to
listen to an audio disc or a radio channel and leave
the TV in standby.
To only switch on the HTS, with the TV in standby,
press

SOURCES on the TV remote control.
9.3
EasyLink
With EasyLink you can operate a connected device
with the TV remote control. EasyLink uses HDMI CEC
to communicate with the connected devices. Devices
must support HDMI CEC and must be connected with
an HDMI connection.
32