background image

                                                                           
 

 

SIP IP Phone User Manual

 

       

                                                               

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5

 

MUTE

:  

1. 

Mute the voice of Microphone and let others can’t hear from user in communication. 

2. 

Change input mode to be digit or character mode: When configuration in LCD menu 
can change input mode to be input digit only or input character. 

 

▲▼

: Move to up/down, left/right ; increase/decrease value. 

 

OK

: Press OK to confirm the modification. 

 

Flash

:  

1. 

Transfer a call. User A can press FLASH button when in communication with user B, 
then input phone number can make call to User C, after talk with C, A can hang up, 
User B and User C can communicate.   

2. 

Back to upper level of menu: when in LCD Menu, press FLASH button can jump to 
upper level of menu. 

 

REDIAL / HOLD

:  

1. 

Redial the last outgoing call or hold one call in communication.

 

2. 

Upper-case/Lower-case character: change input character mode to be upper case 
or lower-case.

 

 

SPEAKER

: Speaking without picking up handset. 

 

5 Graphic Memory key

: User presses these keys to do speed dial according to phone 

book data 1-5 (please refer to LCD configuration-Phone Book, Configuring the SIP IP 
Phone (IPP-120) through Telnet command lines - [pbook] command, or Web 
Configuration-Phone Book chapter). 

 

Number 1 –10, * and #

: The function is as the same as the general phone set. 

Corresponding list of keypad and symbol:

 

1 “1” 

 

“a” ; “ b” ; “c” ; “2” 

“d” ; “e” ; “f” ; “3” 

“g” ; “h” ; “i” ; “4” 

“j” ; “k” ; “l” ; “5” 

“m” ; “n” ; “o” ; “6” 

“p” ; “q” ; “r” ; “s” ; “7” 

“t” ; “u” ; “v” ; “8” 

“w” ; “x” ; “y” ; “z” ; “9” 

“.” ; “@” ; “_” ; ”-“ ; “,” ; “!” ; “?” ; “’” ; “+” ; “$” ; “*”   

“Space” ; “0” 

# “#” 

 
 

Summary of Contents for IPP-120





















































Reviews: