SIP IP Phone User Manual
42
4. –pxport:
set listening port of Proxy server.
5. –outpx:
set IP address of outbound proxy server. After user set outbound proxy, all
packets form SIP-Phone will be sent to outbound proxy server.
6. –prefix:
set prefix string. If user ID contains alphabets, user can set it as prefix
string here. For example, if Account Name is 123, SIP-Phone will sent out
messages as Account Name @”IP address of Proxy”, if user set prefix as abc,
SIP-Phone will set out as abc123@”IP address of Proxy”. This function is for special
proxy server.
7. –line
: identify one number for the SIP IP Phone (IPP-120) to register to the Proxy
(SIP –line “line number”).
Note:
In proxy mode please remember to set user account information under
security command.
8. –pbsearch:
enable/disable phone book search function under Proxy Mode. If user
enabled this function, SIP-Phone will search dialed number in phone book to see if
there is any matched table before send to Proxy server, and if there is a matched
data in phone book, SIP-Phone will make call to related IP address.
9. –expire:
set expire time of registration. SIP-Phone will keep re-registering to proxy
server before expire timed out.
10. –port:
set listening UDP port or SIP-Phone.
11. –rtp:
set RTP port number. SIP-Phone will use this port to send and receive voice.
12. –sexpire
: set session expire timer. When user set session timer time, LAN Phone
will keep checking if connection is still available in communication. If the other side
doesn’t response session timer request, LAN Phone will drop this call after session
timer timed out. (
sip –sexpire “time”
, 0 is disabled, time unit is in seconds.)
