SIP IP Phone User Manual
14
7. PoE Config (PPPoE Configuration)
(1) User Name
Set PPPoE connection authentication user name.
(2) Password
Set PPPoE connection authentication password.
(3) Reconnect
Select ON or OFF to enable or disable this function. If user enables this
function, after PPPoE disconnected, SIP-Phone will automatically reboot
to re-connect, and after reboot, if SIP-Phone still can’t connect with server,
SIP-Phone will keep trying to connect. On the other hand, if user disables
this function, SIP-Phone won’t reboot and keep trying to connect.
(4) Exit
Return to upper level of LCD Menu
8. IP-Sharing
If SIP-Phone is behind IP sharing or NAT device, and SIP-Phone is
under Peer-to-Peer mode or Proxy mode (doesn’t support endpoint
behind NAT function), on IP sharing must enable “
DMZ
” function or
set “
Virtual Server
” to open ports (UDP port: 5060 and 16384, 16385).
SIP-Phone must enable this IP sharing function.
User must enter public IP address of IP sharing.
9. Exit:
Return to upper level of LCD Menu
6. Advanced Set (can be protected by password)
z
Password:
User must key in password to enter this menu if password has been set, items
under this command are all important ones, which can only be configured by
advanced users. If password hasn’t been set, user can enter this menu
directly without entering password.
Note:
1. If user forget password, please contact with your distributor, we will
generate a specific password according to your MAC address of
SIP-Phone.
2. User can also try to configure SIP-Phone via Telnet or Web browser with
