SIP IP Phone User Manual
25
3. System Configuration
Please refer to chapter
4.12 [sysconf] command
-
Keypad
DTMF
Type:
set DTMF type. User can select DTMF type SIP-Phone
transmits.
-
RFC2833 Payload Type:
change RFC2833 Payload type. This is for special request
from the other site, if RFC2833 payload type of 2 sites are different, it may cause
some problem of connection.
-
Inter Digit Time:
Set the DTMF inter digit time (second)
To set the duration (in second) of two pressed digits in dial mode as timed out. If
after the duration user hasn’t pressed next number, SIP-Phone will dial out all
number pressed.
-
End of Dial Digit:
select end of dialing key, e.g. set end of dial key as
*
button, after
finished pressing dialing number then press
*
will dial out.
