SIP IP Phone User Manual
38
8. [time] command
When SIP IP Phone (IPP-120) enable SNTP function and be able to connect with
SNTP server, type
time
command will show the current time retrieved from SNTP
server.
9. [ifaddr] command
Configure and display the SIP IP Phone (IPP-120) IP information.
1.
–print:
print out all current configurations of ifaddr command.
2.
-ip, -mask, -gate:
Set SIP IP Phone (IPP-120) IP Address, subnet mask and default
gateway respectively.
1.
-ipmode:
Set SIP-Phone network mode to be Fixed IP, DHCP or PPPoE.
When User set IP mode to be fixed IP, please set IP, subnet Mask, default gateway
as mentioned in item 2.
If User set IP mode to be DHCP, SIP-Phone will search for DHCP server to capture
IP address after reboot.
If user set IP mode to be PPPoE, please remember to set related parameters under
[pppoe] command
.
2.
-sntp:
When SNTP server is available, enable SIP IP Phone (IPP-120) SNTP
function and assign SNTP server IP address so that SIP-Phone can capture current
time from SNTP server.
(ifaddr –sntp 1 “xxx.xxx.xxx.xxx
”)
3.
-dns:
User can set primary and secondary Domain Name Server IP address. Once
SIP-Phone can connect with DNS server, user can specify URL address instead of
IP address for Proxy Server and phone book IP address...etc.
(ifaddr –dns 1
“primary DNS server address
”
–dns 2 “secondary DNS server address
”)
4.
–timezone:
User can set different time zone according to the location SIP-Phone is.
For example, in Taiwan the time zone should be set as 8,which means GMT+8.
