SIP IP Phone User Manual
9
Chapter 2 Configuring the SIP IP Phone (IPP-120) through LCD
Phone menu
Note:
1. After any configuration has changed for the SIP IP Phone (IPP-120), user has to do
Reboot
in the selection 7 “Reboot”.
2. We suggest user to set IP address via LCD menu 5
→
2.3.4.5 first, then go to
chapter 3 to do other configurations via web browser. If user need to do more
detail or advanced configurations, please refer to chapter 4 and use Telnet
command lines.
3. User can also try to enter web configuration via default IP address of SIP IP Phone
(IPP-120):
10.1.1.3
1. Initialize SIP IP Phone (IPP-120)
1. After SIP IP Phone (IPP-120) finish initializing, it will get into standby mode:
The main LCD screen would be shown as similar as above. “
Proxy
” means the SIP
IP Phone (IPP-120) is in Proxy Mode.
Note:
If SIP-Phone didn’t register to Proxy server, when SIP IP Phone (IPP-120) been
off-hook, user will hear busy tone instead of dial tone.
2. When SIP IP Phone (IPP-120) is under peer-to-peer mode, on LCD will show “
P2P
”
instead of “
Proxy
”.
SIP-Phone
Proxy
SIP-Phone
P2P
