SIP IP Phone User Manual
40
reboot, if SIP-Phone still can’t connect with server, SIP-Phone will keep trying to
connect. On the other hand, if user disables this function, SIP-Phone won’t reboot
and keep trying to connect. (
pppoe –reboot 0/1
)
5.
–echo
: to set PPPoE send echo request function or not. Under some ISP sending
echo request will cause abnormal behavior for LAN Phone, however, if user disable
echo function, when ISP disconnect, LAN Phone will not try to reconnect. Suggest
for most ISPs this function need to be enabled. Please refer to
pppoe –reboot
function.
11. [flash] command
This command will clean the configuration stored in the flash rom to default value and
reboot the SIP IP Phone (IPP-120).
Note:
1. After user upgrade new software version, suggested to execute this command
to make sure new software work well on SIP IP Phone (IPP-120).
2. To execute the command
flash –clean,
all configuration of SIP IP Phone
(IPP-120) stored in flash will be cleaned. It is authorized for the user whose
login name is “root” only.
