SIP IP Phone User Manual
46
17. [bureau] command
1.
: display all current configurations.
2.
–hotline
: set hotline IP and remote phone number. If user has enable Hotline
function, once SIP IP Phone (IPP-120) been off-hook, it will automatically dial out to
assigned IP and phone number.
(
bureau –hotline “IP of destination” “Phone number of destination”
)
Note:
To set SIP IP Phone (IPP-120) under hotline mode must set following
configurations:
1. Peer-to-Peer mode:
sip –mode 0
2. Hotline service:
sysconf –service 1
18. [rom] command
1. -print
: show all current configurations and version information.
2. -app
,
-boot
,
-dsptest
,
-dspcore
,
-dspapp
,: upgrade main boot code, main
application code, DSP testing code, DSP kernel code, DSP application code, Ring
Back Tone PCM file and Hold Tone .
Note:
After upgrade Application, please remember to execute
flash –clean
command,
