iXM-MV150F/iXM-MV100 Camera Systems
Installation Guide
Page 33
9
Interpreting the Camera LEDs
The camera has three LEDs on its back to show camera status, as follows:
9.1
Temperature Warning
When the internal temperature of the iXM-MV150F/iXM-MV100 camera exceeds its
upper limit (usually while working continuously for an extended amount of time: e.g. in
HDMI mode or rapid capturing), the camera signals a warning by toggling the Operation
LED. The warnings are activated as per the Temperature Warnings table:
Note:
Thermal shutdown stops all active capturing:
•
All images not saved will be lost.
•
If the temperature falls below the warning level, capturing restarts and works normally.
Color:
LED
#:
Off
Orange
Green
Red
Blue
1. Storage
No storage
Storing
Storage
available
X
X
2. Operation X
Capturing
Ready
Not ready
Live view /
HDMI
modes
3. Power
No power
Starting-up Power on
X
X
Temperature High
Flashes slowly in
Green
(regular mode) or
Blue
(Live View or HDMI modes).
Temperature too high
Flashes quickly in
Green
(regular mode) or
Blue
(Live View or HDMI modes).
Thermal Shutdown
Flashes quickly in
Red
.
