iXM-MV150F/iXM-MV100 Camera Systems
Installation Guide
Page 31
8
Firmware
8.1
Installing the Firmware Updater Application
To install the Phase One Firmware Updater Application
:
1. Download the Phase One Firmware Updated here.
2. Double-click “
Firmware Updater.<version>.exe”
file to start the Firmware Updater Setup Wizard.
3. When installation completes, click
Start > Phase One > Firmware Updater
.
8.2
Updating the Firmware
Before starting, ensure that your computer has the Firmware Updater application installed and the computer
is connected to the Internet.
To update the iXM-MV150F/iXM-MV100 camera firmware:
1. Connect the camera to the computer with a USB 3.1 cable.
2. Connect the camera to a power source and turn the power on.
3. Start the Firmware Updater application
4. The Firmware Updater automatically checks online for a new version of firmware and displays a
download button if your camera requires an update
5. If displayed, click the link to download the firmware. The firmware is saved locally
6. From the Select Firmware dropdown menu, select the firmware that you want to update.
7. After downloading the new firmware, the Release Notes button is no longer grayed out.
8. Click the Release Notes button to download the release notes for the newest firmware.
9. To update the camera to the latest firmware, click Update. The firmware is written to the camera
and a gear icon
is displayed next to the MAIN component and a progress bar displays the
progress of the update.
10. Wait until the camera finishes the update uninterrupted;
do not power off the camera
. The update
process usually ends with the camera undergoing an automatic power cycle.
11. Upon a successful completion of the update, the MAIN component is marked with a green check
mark icon.
12. If the update fails, disconnect the USB 3.1 cable, reconnect it, and repeat the procedure described
above.
