iXM-MV150F/iXM-MV100 Camera Systems
Installation Guide
Page 22
To configure Camera Settings:
•
Go to Camera settings.
•
Click or Scroll to the sub settings to use (e.g., Capture Setup, Capture Status,
Power Management, etc.) and open it (if not already open).
•
Select the specific parameter to configure, e.g., ISO (under Capture Setup).
•
Click the dropdown arrow (or click the minus [–] or plus [+]) sign).
a
Select the specific value to use.
Table 5:
Important Camera Settings
Function
Description
Shutter Mode
To set the Shutter Mode:
1. Go to Camera settings | Capture
Setup.
2. Click Shutter Mode.
3. Select the shutter Mode to use (ES, LS, GR).
Note:
LS is shown only if an LS lens is connected.
File
Compression
To set the File Compression:
1. Go to Camera settings | Capture Setup.
2. Click Compression.
3. Select the compression type to use.
Storage
To configure Storage settings:
1. Enter “Storage” into the
search box.
The storage configuration
options display.
2. Select the option to use for local storage (XQD card) and host storage
(using USB/10G):
•
“
Enable
” - The respective storage must be connected otherwise
the camera will not be ready to capture.
•
“
If
Present
” - The respective storage will be used if it is present.
•
"
Disable
" - The respective storage will not be used.
