iXM-MV150F/iXM-MV100 Camera Systems
Installation Guide
Page 15
4.5
Mounting a Lens onto an SK Lens Adapter
Note
: Before mounting or dismounting a lens, ensure that the power cable is not attached
to the camera.
1. Ensure that the three clamp cams (only 2 shown in image) are in the unlocked
position. If locked, use a flat screwdriver to rotate each cam 90 degrees counter-
clockwise.
Figure 11
: CAM Locked
Figure 12
: CAM Unlocked
2. Rotate the front body cap counterclockwise and lift it out.
3. Remove the rear cap from the lens.
4. Align the white alignment dot on the lens adapter with the white alignment dot
on the lens and fit the lens into place.
