iXM-MV150F/iXM-MV100 Camera Systems
Installation Guide
Page 26
4. Enter a unique name and
IP address
for the camera.
5. After several seconds, the camera connects to the host computer.
6. If the camera does not connect over 10G, disconnect it from 10G and reconnect it using a
USB3 cable.
7.2
Verifying a camera’s IP address
7. Connect the camera to Capture One using a USB3 cable.
8. Go to the tab: Camera > Camera settings > Network – 10G.
9. Make sure that the IP configuration settings are valid and that the 10G option is set to
Enable in
Camera Settings > Power Management
.
