iXM-MV150F/iXM-MV100 Camera Systems
Installation Guide
Page 23
Function
Description
Network 10G
To set Network 10G:
1. Go to Camera settings | Power Management | 10G.
2. Select Enable.
3. Go to Camera settings | Network - 10G.
4. Enter the values for each parameter.
5. Once finish setting the parameters, go to Status/Action
parameter and select Apply now.
Low Power
Mode
To set Low Power mode:
1. Go to Camera settings | Power Management | Low
Power Mode.
2. Select the time to wait before entering low power
mode.
Note:
Selecting “Immediately” may affect high capture
rate.
6.1
Storing Images
You can save images to an onboard computer running iX Capture, to the Phase One SDK or to Capture One
using a USB 3.1 cable or a 10G cable. An alternative method is to work in
portable mode
and to use a XQD
card as your storage device.
