iXM-MV150F/iXM-MV100 Camera Systems
Installation Guide
Page 12
4
Preparing the Camera with Lens
iXM-MV cameras are equipped with the M72 adapter fitted as standard. To use SK lenses,
replace the M72 adapter with an SK Lens Adapter.
Note
: Before mounting or dismounting a lens, or attaching or removing an adapter,
ensure that the power cable is not attached to the camera.
•
Mount/dismount lenses and attach or remove adapters only in a clean
environment.
•
Place a soft cloth onto the table to avoid scratching camera or lens and put a
lens cap on the lens.
4.1
Mounting a Lens onto M72mm MV Interface
To mount a lens on the M72mm MV interface (adapter):
•
Remove the cap from the back of the
lens and set it aside.
•
Remove the cap from the camera
body and set it aside.
•
Align the back of the lens (the
threaded end) with the camera mount
and fit the lens into the interface.
•
Gently, rotate the lens
clockwise
into
the mounting threads until it is fully
stopped.
The lens is mounted.
Figure 6:
Mounting lens onto
M72mm interface
4.2
Dismounting a Lens from the M72mm Interface
•
Place a lens cap on the lens.
•
Hold the lens and the camera body firmly with 2 hands and rotate the lens
counterclockwise
until it detaches from the camera body.
•
Place a cap on the back of the lens and set it aside.
•
Place a cap on the camera body and set it aside.
2
1
