Installation and Configuration Guide
Appendix 2: Uniprint Configuration Settings
47
Show Money
Select “Yes” if costs are to be displayed when making copies and releasing print
jobs. Selecting “No” means that the Prices and Cost Center fields will not appear
on the copying screen, and the print job cost will not be displayed on the
printing screen.
Time Zone
This property sets the time zone that is going to be used by the PS200 terminal.
By default, this is set to “
Use Server
” which means that the PS200 uses the time
zone of the Pharos EDI Server. However, you can configure this property to use
GMT offset. Click on the dropdown box to show a list of all the available time
zones.
This is particularly useful if you have an EDI terminal on one location and an EDI
Server on another location (assuming that these locations are on different time
zones).
The following Session properties only appear when
Show Advanced Properties
is toggled on from the
Release Stations Actions Pane.
Property
Description
Screensaver Time
(minutes)
Enter the amount of time (in minutes) after which the Omega Terminal's
screensaver will be activated if no user activity is detected on the main menu
screen at the Touchscreen. For example, if you have set the Screensaver Time to
2 minutes, after 2 minutes of inactivity, the Screensaver starts.
If a change control is pending, the screensaver's activation will be delayed by an
extra ten seconds.
Screen Turn Off
Time (minutes)
Enter the amount of time (in minutes) after which the PS200’s display will shut
down to save power and extend the life of the screen. This period starts at the
same time as the Screensaver Time.
Outside of the available hours (as defined by Access Times), Omega Terminals
shut down as soon as the Screensaver Time has elapsed. Omega Terminal
automatically comes out of screen suspend mode at the start of the available
hours.
The screen suspend feature is only supported on newer Omega Terminal
hardware versions.
