Installation and Configuration Guide
PS200 Touchscreen Administrator
29
*Access, Third Party charging and Uniprint information apply only to Pharos Uniprint. All the other
information apply to both the Pharos Uniprint and Blueprint Enterprise.
All the properties in the
station.ini
are configured in the Pharos Administrator for Uniprint and the
Blueprint Administrator for Blueprint.
The
Copier
screen under Station also contains a
Learn Copier
button, which starts a series of tests that
allows the copier details to be determined automatically and sent to the Pharos Database. See “Training
the Omega to detect Copiers” above for more information.
Syslog
Settings
Description
Logging
The properties on this screen determine what information is
logged from the PS200.
The following describes the different logging settings for the
PS200.
Station Levels
The Station Levels defines the types of messages that should be
logged. Enter a number between 0 and 5 to specify the station
level The meanings of each value are:
0 = Fatal error messages
1 = Error messages
2 = Warning messages
3 = Notice messages
4 = All messages from levels 0 – 3
5 = SmartLink messages
Each level includes all levels below it, e.g. entering 2 will cause
warning messages, error messages and fatal messages to be
logged.
SOAP Levels
Enter a number between 0 and 5 to specify how much detail
should be logged for SOAP messages sent to and from Omega. 0
= no logging of SOAP messages, 5 = full logging of SOAP
messages.
