Installation and Configuration Guide
Configuring Omega PS200
22
Training screen
For each test, you are instructed to make a
number of copies of the specified properties.
Ensure that the copier is set to use the paper size
and properties specified on this screen.
When training for Duplex copying, 2 Copies means
two pages double-sided on one sheet.
Once the required number of copies has been
made, press Finished to view the results of the
test.
Results screen
Once a test is complete, this screen displays the
timing diagram generated by the test. If the test
was successful, the configuration values obtained
are displayed below. If the test failed, an error
message indicating why the test failed is displayed.
Press
Back
to return to the Detecting Copier
Signaling screen.
Results screens can be accessed by clicking one of
the View buttons on the Detecting Copier Signaling
screen.
Once all tests are performed, press the
Apply Changes
button on the Detecting Copier Signaling screen
to send the collected configuration details to the Pharos Database and exit back to the
Station > Copier
screen. If the details need adjusting at a later date, this process can be run again.
