1
. INSPECTION/ADJUSTMENT
11
BR & M2 250 ENGINE
Tighten them to their specified torque values if
any looseness is found.
WHEELS/TIRES
Check the tires for cuts, imbedded nails or other
damages.
Check the tire pressure.
Tire Pressure
1 Rider
2 Riders
Front
1.75kg/cm
²
1.75kg/cm
²
Rear
2.00kg/cm
²
2.25kg/cm
²
STEERING HANDLEBAR
Raise the front wheel off the ground and check
that the steering handlebar rotates freely.
If the handlebar moves unevenly, binds, or has
vertical movement, adjust the steering head
bearing.
SUSPENSION
Check the action of the front/rear shock
absorbers by compressing them several times.
Check the entire shock absorber assembly for oil
leaks looseness or damage.
Jack the rear wheels off the ground and move the
rear wheel sideways with force to see if the
engine hanger bushings are worn.
Replace the engine hanger bushings if there is any
looseness.
•
Tire pressure should be checked when
tires are cold.
＊
Summary of Contents for Bug Rider BR-250
