PGO Bug Rider BR-250, Service Manual

Page: 11 / 121

1
. INSPECTION/ADJUSTMENT
9
BR & M2 250 ENGINE
Turn on the headlight switch.
Adjust the headlight aim by turning the headlight
aim adjusting bolt.
CLUTCH SHOE WEAR
Start the engine and check the clutch operation
by increasing the engine speed gradually.
If the motorcycle tends to creep or the engine
stalls, check the clutch shoes for wear and
replace if necessary.
COOLING SYSTEM
COOLANT LEVEL INSPECTION
Place the motorcycle on its main stand on level
ground.
Check the coolant level of the reserve tank and
the level should be between the upper and lower
level lines.
If necessary, fill the reserve tank with
recommended coolant to the “F” level line.
Recommended Coolant: SIGMA Coolant
(Standard Concentration 30%)
COOLANT REPLACEMENT
Remove the front cover.
Remove the radiator cap.
Remove the drain bolt to drain the coolant and
tilt the motorcycle to the right and the coolant will
drain more easily.
Drain the coolant in the reserve tank.
Reinstall the drain bolt.
Fill the radiator with the specified coolant.
Coolant capacity : 1165cc
Radiator capacity : 825cc
Reserve tank capacity : 340cc
Lower Line
Upper Line
Radiator Cap
•
The coolant level does not change no
matter the engine is warm or cold. Fill to
the “F” (upper) line.
＊
•
The coolant freezing point should be 5
℃
lower than the temperature of the riding
area.
＊
•
Perform this operation when the engine is
cold.
＊
Reserve Tank