9
. A.C. GENERATOR/STARTER CLUTCH
6
BR & M2 250 ENGINE
ENGINE
Install the wire grommet in the groove in the
right crankcase cover securely.
RIGHT CRANKCASE COVER
INSTALLATION
Install the two dowel pins and a new gasket.
Install the right crankcase cover over the
crankcase, aligning the water pump shaft
groove with the oil pump shaft.
Tighten the nine right crankcase cover bolts.
Connect the water hoses to the right crankcase
cover.
Add the recommended engine oil. (
ð
3-3)
Fill the cooling system with the specified
coolant. (
ð
1-9)
Right Crankcase Cover
Oil Pump Shaft
Dowel Pins
Be sure to route the stator wire under the
pulser coil.
*
Screws
Gasket
Pulser Coil
A.C. Generator Stator
Water Pump Shaft
•
Be sure to bleed air from the water jacket
after filling the coolant.
*
Summary of Contents for Bug Rider BR-250
