PFT G 5 c FU, Operating Manual

Page: 29 / 56

PFT G 5 c FU 230V Operating Manual Issued: 09.2007
Knauf PFT GmbH & Co. KG
29
Accessories
PFT injection hood for G 5 (item number 00 04 43 34)
The PFT injection hood is used for the feeding of dry material into the PFT G 5 c FU 230
mixer pump with the help of the SILOMAT system.
PFT delivery hood for G 5 c, cpl. (item number 00 04 03 32)
The PFT delivery hood is for feeding the
PFT G 5 c FU 230 mixer pump with dry
material directly from the silo/container. If the material hopper of the PFT G 5 c FU 230
mixer pump signals that it is empty, the mixer pump stops.
ROTOMIX D pumps, cpl. with size 35 coupling (item no. 20 11 80 00)
Agitator for the improved solubilisation and mixing of the material.
Direct drive via the rotor tenons. Volume of approx. 1.2 l
All guidelines of the material manufacturer must be observed.
ROTOQUIRL II, cpl. with size 35 coupling (item no. 20 11 84 00)
Agitator for the improved solubilisation and mixing of the material.
Direct drive via the rotor tenons. Volume of approx. 4.2 l
All guidelines of the material manufacturer must be observed.
Star wheel spacer for coarse plaster (item no. 20 10 19 00)
Increases the distance between the star wheel and the base of the material hopper by
3 mm.
Nozzle for water intake with Geka coupling
(
item no. 20 21 58 00)
For the improved injection of water into the mixing area in the event of a low water
factor.