29
Setting up
Fig. 9 - 01
2
1
9
Setting up
All instructions and regulations in this instruction manual must be observed.
Special attention must be given to all safety regulations!
All setting-up work must only be done by personnel with the necessary
training. For all setting-up work the machine must be isolated from its power
supply by turning off the on/off switch or removing the machine plug from the
electric power socket!
9
.01
Inserting the needle
Switch off the machine!
Danger of injury if the machine
is started accidentally!
Only use needles from the sys-
tem intended for the machine,
see Chapter
3 Specifications.
Loosen screw
1.
Insert the needle as far as possible. The
long needle groove (see arrow) must be
facing forwards.
Tighten screw
1.
Through hole
2
it is possible to check whether the needle has been inserting as
far as possible.
Broken needles can be removed by inserted suitable tools in hole
2.
●
●
●
Summary of Contents for 3307-1 SERIES
