Adjustment
97
108-150
13
.38
Setting the discharge position on the button clamp
Requirement
When the button clamp opens or closes, there should be no displacement
1. of the height or
2. the lateral position of the button.
●
Switch on the machine and connect it to the pneumatic system.
●
Set parameter "112" at value "1" (switch off stem finger).
●
Using parameter "616" (value "2"), engage button holder
1
and insert the button.
●
Using parameter "616" (value "3"), close the button clamp
●
Adjust button holder
1
(screws
2
) in accordance with
requirement 1
.
●
Adjust drive unit
3
(screw
4
) in accordance with
requirement 2
.
Following this adjustment, without switching off the machine or
disconnecting it from the pneumatic system, the adjustment as described in
Chapter 13.37 Basic setting of the button loading station
must be carried
out with the same parameters.
Fig. 13 - 36
2
1
108-133
4
3
Summary of Contents for 3307-1 SERIES
