Pfaff 3307-1 SERIES, Instruction Manual

Page: 118 / 132

118
Adjustment
13
.49
Description of the error messages
Display Description
Error 1 System error
Error 2 Sewing motor ERROR 2/BB/xxx
BB = 30: Timeout
20: Dead man
10: Speed
0B: StopX
0A: Reset stitch counter
09: Write parameter
05: Positioning sewing head shortest route
03: Positioning sewing head in reverse
02: Positioning sewing head forwards
xxx = Error in sewing motor control unit,
see Chapter 13.50 Sewing motor errors
Error 3 Input insert plate at front (E6 –X5:14)
Error 4 Missed stitch detection with number of missed stitch
0: Error during initialisation of missed stitch detection
Error 5 Input Clamp lowered (E4 –X5:4)
"Switch clamp" locked, as main drive not in raised position.
Error 6 Time monitoring while running through sewing program
Error 7 - 1
Error 7 - 2
Error 7 - 3
Error 7 - 4
Error 7 - 5
Stepping motor motion:
Delay X not ready
Delay Y not ready
Delays X and Y not ready
Ramp X not ready
Ramp Y not ready
Error 8 Stitch length
Error 9 Sewing figure outside area
Error when moving to home position
Error 10 - 1
Error 10 - 2
Error 10 - 3
Error 10 - 4
Error 10 - 5
Error 10 - 6
Error 10 - 7
Error 10 - 8
Error 10 - 9
Error 10 - 10
Error 10 - 11
Error 10 - 12
Error 10 - 13
Error 10 - 14
Outputs not ready
Raise clamp
Insert position not reached
Blind stitching and input "blind stitching on" = 0
No blind stitching and input "blind stitching on" = 1 or
input "insert plate at front" = 1
Pedal operated
X-centre not reached
X-centre not left
Y-centre not reached
Y-centre not left
Time monitoring home test
Absolute position – 0.3 not reached home test
Absolute po 0.6 not reached home test
Needle raised position not reached
Error 11 Stepping motor step frequency too high
Error 12 Error in sewing program