123
Adjustment
Fig. 13 - 46
1
Switch on the machine, keeping the boot
key
1
pressed.
Press the "TE" key.
The software update is carried out. Du-
ring the updating process the diode in
the memory card slot flashes.
During the updating process the machine
must not be switched off.
When the update has been completed,
switch off the machine and remove the
SD-card.
Switch on the machine
A plausibility control is carried out and, if
necessary, a cold start.
More information and assistance is at your disposal in the file "PFPHILFE.TXT",
which can be called up from the PFP boot program by pressing the "help"
button.
●
●
●
●
●
●
To update the machine software carry out the following steps:
While the machine software is being updated, no setting up, maintenance or
adjustment work may be carried out on the machine!
With the machine switched off insert the SD-card into the control panel.
●
Summary of Contents for 3307-1 SERIES
