24
Wheel lock release sensor
Wheel lock release sensor
Removal
1.
Switch off the main power switch on the control
panel.
2.
Put the circuit breaker in the “OFF” position. It is
accessed through a hole in the chassis cover;
see page 45.
3.
Remove the seat lift cover, chassis cover and
the right front fender, see page 7.
4.
Remove the wheel lock release mechanism;
see page 22.
5.
Remove the wheel lock release sensor. It is
attached with two screws, see fig.
6.
Disconnect the electrical connection of the
wheel lock release sensor, it´s positioned on the
wheel lock release sensors cabling.
Fitting
Fit the Wheel lock release sensor in the reverse
order.
Wheel lock release sensor.
1
Locking nut, DIN 985 M3 6 Fe/Zn 5 C1
2
Wheel lock release sensor, VS10N001A/Highly
3
Screw, ISO 4017 M3x16 8.8 Fe/Zn 5 C1
Pos.
Description
3
2
1
Summary of Contents for C500
