Permobil C500, Service Manual

Page: 7 / 68

7
Covers
Covers
Removing the seat lift cover
1. Raise the seat to the highest position. If the
chassis is equiped with fixed seat post, see
page 38. If the seat lift does not work normally
because the batteries are discharged or the
actuator is defective, the seat can be raised/
lowered manually, see page 30.
2. The seat lift cover is mounted with four
plastic plugs which can be flipped up using a
screwdriver.
3. Remove the seat lift cover by lifting it
upwards/forwards.
Fitting
Fit the cover in the reverse order.
The chassis cover is mounted with two knobs at
the front edge and one knob at the back.
The seat lift cover is mounted with
four plastic plugs.
Removing the chassis cover
1. Raise the seat to the highest position. If the
chassis is equiped with fixed seat post, see
page 38. If the seat lift does not work normally
because the batteries are discharged or the
actuator is defective, the seat can be raised/
lowered manually, see page 30.
2. Remove the seat lift cover, see above.
3. Remove the two knobs on the front edge of the
cover, see fig.
4. Unscrew the knob at the far back of the
chassis cover, see fig.
5. Remove the chassis cover by lifting it upwards/
backwards.
The front fender is mounted with three screws.
Removing the front fender
1. Remove the three screws, see fig.
2. Remove the front fender by lifting it
upwards/forwards.
Fitting
Fit the cover in the reverse order.
If the chair is equipped with lighting, remove the chassis-
and seat lift cover. Disconnect the front-light cabling at the
connector fitted on the cabling.
m
NOTE
If the chair is equipped with lighting, disconnect the rear-light
cabling at the connector fitted on the cabling.
m
NOTE
Fitting
Fit the front fender in the reverse order.