Permobil C500, Service Manual

Page: 46 / 68

46
Lights
Front lights
The front light is attached with three screws.
Lights
(Accessories)
Removing the front lights
1. Switch off the main power switch on the control
panel.
2. Put the circuit breaker in the “OFF” position. It is
accessed through a hole in the chassis cover;
see page 45.
3. Remove the seat lift cover, chassis cover and
the front fender on the side in question, see
page 7.
4. Disconnect the electrical connection of the front
light in question, it´s positioned on the front light
cabling on the inside of the chassis.
5. Clip the cable ties that hold the cable.
6. Remove the Cable pass-through on the front
fender in question.
7. Remove the front light in question. It is attached
with three screws; see fig.
Fitting
Fit the front light in the reverse order.