23
Wheel lock release cable
Wheel lock release cable
Fitting
1.
Fit the cable at the magnetic wheel lock first,
then at the release lever.
2.
Adjust the cable sleeve length with the adjusting
screw (2) so that the cable is sufficiently
tensioned so that the wheel lock release
sensor (see figure) is actuated just before the
cable pulls the release.
3.
Ensure that the wheel cannot be turned before
the wheel lock release sensor has been
actuated.
4.
Ensure that the wheel can be turned when the
wheel lock release coupling is released with the
release lever.
5.
Tighten the lock nut (1).
6.
Refit the wheel lock release mechanism and
the covers.
Mechanism for wheel lock release.
Wheel lock release sensor.
Summary of Contents for C500
