22
Wheel lock release cable
Wheel lock release cable
Removal
1.
Raise the seat to the highest position. If the
chassis is equiped with fixed seat post, see
page 38. If the seat lift does not work normally
because the batteries are discharged or the
actuator is defective, the seat can be raised/
lowered manually, see page 30.
2.
Switch off the main power switch on the control
panel.
3.
Remove the seat lift cover, chassis cover and
the right front fender, see page 7.
4.
Remove the wheel lock release mechanism.
It is attached with two screws; see fig.
Adjustment of wheel lock release cable.
Lock nut (1) Adjusting screw (2).
The wheel lock release mechanism
is attached with two screws.
1
2
Wheel lock release cable attachment
at the magnetic wheel lock.
7.
Remove the cable at the magnetic wheel
lock by pulling the cable casing forward and
passing the cable through the slot in the cable
holder. Detach the wheel lock release cable
from the magnetic wheel lock.
8.
Remove the cable from the release lever.
5.
Remove the lock nut (1).
6.
Screw in the adjusting screw (2) fully.
Summary of Contents for C500
