Perkins SMART Brailler™ User Manual | Rev: 041814
the one you braille after reinserting the paper may not be quite
right, so if exact spacing is important, you may need to start over
on a fresh sheet of paper. Press the Select Button to turn Braille
Tracking back on when you are ready to start brailling again.
When you have brailled as much as you want on a line, press the Line
Spacing key and move the Carriage back to the left margin. If you
move the Carriage to the left before pressing the Line Spacing key, it
may damage the dots you have brailled.
Correcting Brailling Errors
If you want to correct errors on a page, it is best to correct them as you
go. The Smart Module will only keep track of erasures made with the
Easy-Erase Button, and will only keep track of erasures and added
dots if they are made on the current line as indicated by the cursor on
the screen.
If you just need to add missing dots, backspace until the Embossing
Head and the cursor are located over the cell that needs the dots, and
then press the keys needed to add the new dots.
To erase dots on the current line of braille, either use the Easy-Erase
Button or erase them manually. Bear in mind that the Easy-Erase
Button cannot be used for the first cell of a line.
To use the Easy-Erase Button, backspace until the Easy-Erase Button
is directly over the mistake (the Embossing Head and the cursor on the
screen will be located over the cell to the left of the mistake). Then
| tel: +1-617-972-7308 | 175 North Beacon Street Watertown, MA USA 02472
27
