Perkins SMART Brailler™ User Manual | Rev: 041814
Easy-Erase Button
If you make a mistake, simply backspace until the
Easy-Erase Button is directly over the mistake (the Embossing Head
and the cursor on the screen will be over the cell before the mistake).
Then, press down firmly on the Easy-Erase Button several times to
eliminate all of the dots in the cell. The brailler will tell you what it is
erasing the first time you press the button. To braille a new character,
press the space bar once so that the Embossing Head is in the correct
cell.
The Embossing Head must always be one cell to the left of the cell in
which the mistake was made before using the Easy-Erase Button.
Because of this, the first cell of a line cannot be erased with the Easy-
Erase Button. (See also the
manual.)
Reading Rest
The Reading Rest is a panel at the back of the brailler
that can be raised to provide a flat surface for reading the page; a
raised line on the left side can be used to help guide the paper into the
brailler. To raise the Reading Rest, locate the finger indentations on
the back panel of the brailler. The indentions are on both sides and at
the bottom of the panel. Gently pull up on the rectangular piece so it is
level and parallel with the table surface.
Do not push down hard on the Reading Rest or it will drop back down
into position against the brailler. Also, be sure to lower the Reading
Rest to its original position before picking up the brailler with the Easy-
Grip Handle. Do not pick up the brailler by the Reading Rest.
| tel: +1-617-972-7308 | 175 North Beacon Street Watertown, MA USA 02472
21
