Perkins SMART Brailler™ User Manual | Rev: 041814
you until they stop turning.
Step 2
Move the Carriage to the left as far as it will go by placing your
hand to the right of the Carriage and pushing to the left. Do not press
the button on the top of the Carriage or exert any downward pressure.
Step 3
Pull the Paper Release Levers toward you as far as they will
go. You can use either or both levers. This separates the two rollers
slightly so you can insert the paper between the rollers.
Step 4
Gently lift the Reading Rest until it clicks into place and is
parallel with the table surface. Take the shorter edge of the paper and
place it on the Reading Rest. Slide the left edge of the paper against
the raised line on the Reading Rest which acts as a paper guide. Slide
the paper into the brailler under the Embossing Head and between the
rollers.
Step 5
Hold the paper in place with one hand and push the Paper
Release Levers away from you with your other hand, as far as they will
go.
Step 6
Turn one or both Paper Feed Knobs toward you to roll the
paper into the machine. Keep turning the knobs toward you until you
cannot turn them any further. At this point the paper should be in the
machine as far as it will go, with about 1 inch showing at the top of the
brailler.
If the Paper Feed Knobs will not turn, then the paper was not inserted
correctly. Roll the paper back out of the brailler, pull the Paper Release
| tel: +1-617-972-7308 | 175 North Beacon Street Watertown, MA USA 02472
24
