PerkinElmer Spotlight 400 Series, User Manual

Page: 105 / 120

Maintenance . 105
Imager Connections
• The cable from the imager to the spectrometer comes from the preamp inside the
imager, to a connector marked on the rear of the spectrometer.
• The connection labeled
MOTOR X
on the stage controller plugs into the connector next
to the red dot on the motorized stage.
Figure 40 Electrical connections for the imager with USB camera,
dual-range spectrometer with filter box, stage controller, & PC
NOTE: The Filter Box connectors are not marked. The gender of the connectors ensures that
they are connected correctly.