PerkinElmer RamanFlex 400, Getting Started Manual

Page: 63 / 94

Introduction to the RamanFlex 400 . 63
General Overview of the Fiber Optic Probe
NOTE: For details of how to use a triggered fiber optic probe, see the Raman Triggered
Fiber Optic Probe
leaflet (L1321887).
Your RamanFlex 400 spectrometer fitted with a Fiber Optic Probe is a Class 3B laser system.
Please read and understand the general safety precautions outlined in
Safety Practices
starting on page 11 before proceeding.
If you do not understand any of the details regarding general safety precautions, please
contact PerkinElmer before proceeding.
Your instrument should have been installed in accordance with Installing your
RamanFlex 400
starting on page 41.
The Fiber Optic Probe (FOP) is designed to enable the remote measurement of samples. It is
available in a range of different configurations to suit your application. However, it should be
noted that compatibility of the working environment with the probe should be verified with
PerkinElmer prior to use.
The probe body contains the filtering optics and is interfaced with two fiber optic cables (an
excitation fiber and collection fiber). Care should be taken when handling the probe body so
that the optical window is not soiled or damaged.
NOTE: If you use the probe body in any chemical or aggressive environment you must use
an immersion sleeve to protect the probe body. DO NOT ATTEMPT TO USE THE
PROBE BODY IN SUCH AN ENVIRONMENT WITHOUT THE USE OF AN
IMMERSION SLEEVE (L1320003). If required, contact PerkinElmer for further
details.