PerkinElmer RamanFlex 400, Getting Started Manual

Page: 46 / 94

46 . RamanFlex 400 Series Getting Started Guide
Switching on the Instrument
1. Insert the key into the laser power keyswitch on the front panel of the spectrometer
module and ensure that it is turned to the ARM position.
The RamanFlex 400 is supplied with two keys. One should be placed in the instrument
and the other should be stored in a safe place. Replacement keys (L1323503) can be
obtained from PerkinElmer. A laser safety officer or lab manager can control use of the
instrument with these keys.
2. If your instrument is fitted with a deep depletion CCD, connect the 7.5 V PSU
(L1323525) from the
DD POWER
socket on the rear panel to a mains power socket.
3. If your instrument is fitted with a deep depletion CCD, connect the Tygon tubing
between the water recirculator (L1323010) and the
WATER IN/OUT
sockets on the rear
panel, fill the storage tank of the cooler with water, and then plug in and switch on the
recirculating cooler.
For more information about the recirculating cooler, see the operating manual supplied
with the system.
4. Connect the instrument power supply unit (L1321802) to the spectrometer
Main Power
socket and then switch on.
Do not connect to the Aux Power connector.