32 . Peltier Temperature Programmer User’s Guide
Front Panel
The PTP-1 and PTP-6 have one set of buttons on the front panel that are used to set the
temperature in the sample cell holder. The PTP-1+1 and PTP-6+6 control the temperature in
the sample cell holder as well as in the reference cell holder, so the front panel on these
models has two channels. The front panels from the PTP-1 and PTP-1+1 are shown in
Figure 8 PTP-1 and PTP-1+1 Front Panels
1
2
3
4
Upper
display
Lower
display
Summary of Contents for PTP-1
