B. Check if the IP addresses for PC network and IPCamFinder are on the same network section:
- Usually, static IP address will be used to access into Internet, so the IP address will vary. When
you want to change IP address, please write down the original IP address on your computer
first. Then you have to modify the IP address
of your computer for testing if the IP-CAM
can be operated normally . After finishing the
test, IP address for your computer should be
recovered to original settings.
- In general, the IP address for your computer
in LAN will be set with "Auto Obtain IP
address". To test if the IP-CAM is normal ,
the IP address of your computer must be
changed temporarily. After finishing the test,
it can be recovered to original settings.
C. Next, choose Control Panel->Network
Connections->choose the activated area
Network Connections---> right click of
your mouse --->select Properties(P)--->
Select Internet Protocol (TCP/IP)---> Select
Properties(R) , then you can check the
current IP address status for the computer.
The way to modify IP address is:
D. Open and execute IPCamFinder (as shown in Figure 2). The system will automatically scan the
IP-CAM that you just installed . Then, you will find 00:15:0F:00:00:22 192.168.1.100 in the
column of IP Cam List. Click 00:15:0F:00:00:22 192.168.1.100 with left mouse button. You
can see the default settings for IP-CAM.
Step 1.
Select your PC’s Ethernet network
card.
Step 2.
Click Find IP Cam with left
mouse button, you with will see
00:15:0F:00:00:22 192.168.1.100
Step 3.
Click 00:15:0F:00:00:22 with left
mouse button once, you will see
following information
IP Address: 192.168.1.100
Net Mask : 255.255.255.0
GateWay : 192.168.1.1
Step 4.
Click Show IP Cam with left mouse
button once which will start the
Browser automatically. Login using
Username/Password into network
monitor screen (refer to 3.1 for
details). If you can see the image
screen, the IP-CAM is ready to use.
Figure 2
1.
2.
3.
3.
4.
