APPENDIX A. USING A PPPOE DIALUP CONNECTION AND DDNS WITH THE IPCAM
(USING A HUB )
In this example, the PC terminal in HUB and IPCamFinder are used to get IP address through
PPPoE. Then, dial-up using ADSL and eventually connects the client to IPCamFinder through
DDNS. The main setup steps are:
A. Using PC to apply the DDNS account.
B. Connect PC to IPCamFinder search application.
C. Setup IPCamFinder as PPPoE dial-up and execute DDNS setup.
D. Successfully using DDNS to view family use IPCAM.
A. Using PC to apply the DDNS account
You must first have an Ethernet based Cable/ADSL modem (using RJ-45 connector) and make
sure your broadband network is connected normally to Internet according to the method
provided by ISP.
APPENDIX
Step 1.
Open PC and start broadband
network and visit http://www.
dyndns.org/ website first.
Step 2.
Switch to Account page and
click Create Account.
Step 3.
Fill in the account name you
preferred, myipcam for this
example. Then input E-mail
Address and Password.
Step 4.
Select following two options
and click Create Account to
complete application.
