E. IP-CAM Network Framework Installation 5
Way to access Internet
Use dial-up ADSL or Cable Modem
Physical IP Address
Owns one float IP address (dispatched by ISP dynamically)
IP Share or LAN Hub
Not necessary
Network Setup for IP -CAM PPPoE function should be set, LAN Enable Web Server Port Number, no
need to be adjusted
Suitable Objects
Users with dial-up ADSL, and one IP-CAM installed
1. Please acquire the necessary information of ADSL dial-up from your ISP.
ISP related information: ADSL dial-up account name and password
2. Connect the RJ-45 terminator on the rear of IP-CAM to the red test network cable. One end is
connected to the network card of computer; the other end is connected to the rear side of the
IP-CAM.
3. Refer to 2.4-3 PPPoE - IP Address Settings for typing account name and password.
4. Please type the Mail server setup information of IP-CAM.
5. Set up the IP-CAM to Dial-up ADSL Modem.
6. When the dial-up is success, IP-CAM will send a notification e-mail of float IP Address to the
users.
7. Open IE browser and type in the physical IP address (such float IP is dispatched by ISP) of the
IP-CAM, e.g., http://211.78.174.94.
ADSL/
CABLE MODEM
IP CAM
PPPoE Function enable
DESKTOP PC
PDA
3G MOBILE
PHONE
NOTEBOOK
