C. IP-CAM Network Framework Installation 3
Way to access Internet
Use Permanent ADSL or Cable Modem
Physical IP Address
Owns one float IP address (dispatched by ISP dynamically)
IP Share or LAN Hub
Must be equipped with DHCP and NAT functions
Network Setup for IP -CAM LAN Enable / Manually Web Server Port Number, need to be adjusted
Suitable Objects
Users with dial-up ADSL, one float IP address and several IP-CAMs
installed
1. Activate PPPoE function of IP share. Then, set another private IP address and activate the
DHCP server function of IP Share. When the dial-up of ADSL is success, you will get an float IP
address from your ISP.
2. In the IP configuration for each IP-CAM, please assign different virtual IP addresses internally
and
respectively. In the Http Port setting, please specify different port parameters. (Please refer to
2.4-1 STATIC - IP Address Settings to type the IP address properly.)
3. For the port transformation in IP Share, please refer to IP and port settings of camera to
configure accordingly.
4. For viewing images in IP-CAM from remote computer: Open IE browser and type in the float IP
address of ADSL and the port number of IP-CAM, e.g., http:// 211.78.174.01:1025.
ADSL/
CABLE MODEM
PC FOR IP CAM SETUP
192.168.0.1
IP CAM
192.168.0.2:1025
IP CAM
192.168.0.3:1026
IP CAM
192.168.0.4:1027
IP SHAREING
(With DHCP+PPPoE)
Public IP:Connect success than got IP address from ISP
Private IP:192.168.0.254
DESKTOP PC
PDA
3G MOBILE
PHONE
NOTEBOOK
