CTU MEGA 20 Diamagnetic Pump MOD07-2-5 Rev.13 of 28/08/2019
13
PERISO SA
7) Plug the connectors of the
water pipes of the handpiece
to the respective sockets,
applying slight pressure.
Removable cap for topping up
with dematerialized water.
8) Connect the device to the
power network.
It is always advisable not to use extension cords and/or multiple sockets between the
wall outlet and power card, since possible malfunctions and system damage could
result from this type of connection. If however, it becomes necessary to use this type
of connection, make sure that those components are fully functional and equipped
with a grounding conductor.
The device must be positioned in such a way that it is feasible to operate on the plug
or on the switch if it is necessary to interrupt the connection with the mains.
Turning ON and OFF the device
To turn on the device, turn the key on the front of the power module clockwise; to turn it the
device, turn the key counterclockwise.
Emergency Button
If it is necessary to IMMEDIATELY block the device push the
red button shown in the figure.
To unlock the device, rotate the button in the direction of the
arrow.
