4
SKYDECK Panel Slab Formwork
Instructions for Assembly and Use – Standard Configuration
Introduction
Intended use
Technical data
System dimensions
With Drophead SFK,
Main Beam SLT 225
230 x 150 cm, slab thickness max.
43 cm, as standard case presented in
the Instructions for Assembly and
Use
230 x 75 cm, slab thickness max.
90 cm
115 x 75 cm, slab thickness max.
109 cm with centre support
With Drophead SFK,
Main Beam SLT 150
155 x 150 cm, slab thickness max.
52 cm
155 x 75 cm, slab thickness max.
109 cm
With Prophead SSK,
Main Beam SLT 225
225 x 150 cm, slab thickness max.
43 cm
225 x 75 cm, slab thickness max.
90 cm
112.5 x 75 cm, slab thickness max.
109 cm with centre support
With Prophead SSK,
Main Beam SLT 150
150 x 150 cm, slab thickness max.
55 cm
150 x 75 cm, slab thickness max.
109 cm
For permissible slab thicknesses and
available prop loads: see PERI Design
Tables.
Features
The panels and main beams are made
of aluminium which means they are
very light.
Accessories for infill areas, shuttering
around columns and the slab edges are
also available.
Due to early striking, the panels and
main beams can be used for the next
concreting cycle.
Only the props with dropheads and the
cover strips remain in position until the
full concrete strength has been reached.
On-site material requirements are there-
fore clearly reduced.
For supporting the SKYDECK panels,
PERI MULTIPROPs or PEP Slab Props
can be used.
The SKYDECK Platform consists of:
– 39 mm thick plywood decking fixed
to a supporting frame,
– a folding handrail unit that is screwed
to the supporting frame as a framed
construction, and held by a securing
lever when opened up.
The platform can be used on the edge
of the floor slab as well as in the corner
table area. For the various applications,
three lengths are available.
SDB 150
L = 1.50 m
SDB 225
L = 2.25 m
SDB 300
L = 3.00 m
The SDB 225 Platform can also be used
for side cantilevers of 75 cm to the right
or left of the main beam.
Assembly of the platform takes place
with the crane from the outside of the
building. It is set down on the cantile-
vered main beams and automatically
locks in position.
All steel parts are galvanized while all
safety components are red pow-
der-coated.
Product description
PERI products have been designed for
exclusive use in the industrial and com-
mercial sectors by qualified users only.
PERI SKYDECK is a panel slab form-
work system used for constructing slab
thicknesses up to 109 cm. Depending
on the slab thickness and concrete
strength, the SKYDECK Drophead al-
lows striking to take place after only 1
day: see table containing minimum con-
crete strength and striking guide values.
The SKYDECK Platform is a prefabricat-
ed, folding scaffold platform for use as
working and safety scaffold according
to DIN 4420 Part 1. Immediately after
concreting, it is available as safety scaf-
fold to provide safe and secure working
conditions on rising structures.
Classification is effected in Scaffold
Group 2 (useful load per surface
150 kg/m²) . It is required for concreting
floor slabs in skeleton construction
(high-rise buildings) and for securing the
open edges of the SKYDECK Slab
Formwork System. A 1.30 m wide plat-
form with guardrails provides safe work-
ing conditions on the slab edges.
SKYDEKC AuV_ex_791458.indb 4
13.12.16 16:53
Summary of Contents for SKYDECK
Page 25: ...23 SKYDECK Panel Slab Formwork Instructions for Assembly and Use Standard Configuration...
Page 47: ...45 SKYDECK Panel Slab Formwork Instructions for Assembly and Use Standard Configuration...
Page 87: ...85 SKYDECK Panel Slab Formwork Instructions for Assembly and Use Standard Configuration...
