Pepperl+Fuchs VB14N, Manual, Page: 87 / 92

HOST MODE PROGRAMMING
85
PARAMETER CONTROL RULES
Stop Phase Edge
(only for On Line 2
Input)
Must be

Leading if Extended Phase

Enable
ACK/NAK
Protocol
Not available if Operating Mode Selection

On Line .
Not available if Scanner Cluster Topology Role

Slave
Synchronized .
Quality Counters
Not available if Operating Mode Selection

On Line and

Automatic .
Not available if Scanner Cluster Topology Role

Slave
Synchronized .
VERIFIER
Code Verifier
Not available if Code Combination

Single Label .
Not available if Operating Mode Selection

On Line and

Automatic and

Continuous .
READING SYSTEM LAYOUT
Device
Assignment
Must be

Master RS232 (Type A) and

Slave RS232 (Type A)
if Auxiliary Serial Port Data TX

Enable .
Must be

Master RS232 (Type A) and

Slave RS232 (Type A)
if Auxiliary Serial Port Pass Through

Enable .
DATA COMMUNICATION SETTING
Host Application
Protocol Type
Must be

Crisplant if Operating Mode Selection

On Line .
Must be

Crisplant if On Line Options

Serial On Line .
Must be

Crisplant if Main Port Communication Mode

Standard .
Must be

Crisplant if Auxiliary Serial Port Pass Through

Enable .
MAIN SERIAL PORT
Main Port
Communication
Mode
Must be

Standard if Host Application Protocol Type

Standard .
AUXILIARY SERIAL PORT
Data
Transmission
Must be = Disable if Local Device Alternative Network Setting

Master RS232 (Type A) or

Slave RS232 (Type A).
Pass Through
Must be = Disable if Host Application Protocol Type

Standard .
Must be = Disable if Local Device Alternative Network Setting =
Master RS232 (Type A) or = Slave RS232 (Type A).